GRP (GLASS REINFORCED PLASTIC) PRODUCTS

HAND LAY-UP PROCRESS - FILAMNET WONDED WINDING SYSTEM PROCESS - RTM PROCESS - SMC PRODUCTS

LINE OF ACTIVITES INCLUDES

GRP PRODUCTS FOR MANHOLE NETWORKING SYSTEMS

  • GRP Liners
  • GRP Cover Slabs
  • GRP Sealing Plates with EPDM Rubber Gaskets
  • GRP Ladders
  • Safety Cages for Ladders
  • Manhole Covers
  • GRP In-Situ Benching with Non-Slip Surfaces (These products and application can manufacture and apply also install
    as per the QCS Specification 2007)

GRP CYLINDRICAL TANKS

  • Heavy Capacity Storage Cylindrical Horizontal Water & Sewerage Tank
  • Rectangular Tanks, According Clients Requirements
  • Heat Protected Water Tanks

GRP ANTI-CORROSIVE IN-SITU APPLICATIONS

  • Underground Water Tanks
  • Sewerage Tanks Anti-corrosion Coatings
  • Swimming Pools Water Proofing Applications
  • Wet well Chambers GRP Linings
  • Wet Well Pumping Stations GRP Lings
  • GRP Lining for Effluent Tanks
  • Protective coating for Steels & Pipes
  • GRP Water Proofing Works for the Roofs

CUSTOMIZED GRP PRODUCTS

  • Waffle Mould for Concrete Form works
  • Permanent GRP Pile Casing Protection Pipes
  • Oil Separators Meter
  • A/C Tray
  • A/C Cover
  • Car Park Shades
  • Bus Waiting Shed
  • Sea Shell
  • GRP Floorings
  • Bath Tub different sizes & various types (Bath Tub Seat, Bath Tub Taj, Bath French, Bath Tub Lord, Bath Tub Standard)
  • Shower Tray with different sizes & various types
  • Kitchens Sinks
  • Jacuzzi

FILAMENT WINDING SYSTEM

The Manufacturing of a continuous pipe or a sleeve blank is carried out by applying the glass fiber laminate on a
rotating mandrel, calibrated according to the nominal diameter of the pipe under production.

The glass fiber laminate is applied onto the moving mandrel according to the following procedure: firstly a release film,
e.g. polyester film, is wound on the mandrel, followed by a c-veil, both of them supported by proper winders. Glass roving,
together with chopped glass, sand aggregate and polyester resin, is applied simultaneously in predetermined positions,
according to design specifications. Finally, a layer of surfacing veil is applied. According to the process philosophy,
the inner layer provides the required chemical resistance, while the material applied over the liner layer represents the
mechanical resistant outer layer. The pipe's layers can easily be made in compliance with the appropriate design by
controlling the quantity and sequence of various materials applied.



RTM PROCESS SYSTEM:

  • Fabrication of Dooms
  • Electric Meter Cabinets
  • Water Meter Cabinets
  • Telephone Cables Cabinets
  • Fire Extinguisher Boxes
  • Fire Water Hose Reel Boxes
  • Cabinet Sink
  • Hanging Trash Bin Flower Box
  • Telecom Box
  • Picnic Stool
  • Sealing Products
  • Room Partitions
  • GRP Floorings.
  • Stadium seats
  • Garden Umbrella
  • Mini Boat